The default passwords for each account are “user, “expert”, and “fliradmin”, respectively. The updated camera will have the following login accounts: user, expert and admin. It will not be possible to use the old configuration file with the updated firmware, but the file can be viewed or compared to the factory configuration to see what was changed. Prior to updating a camera, it may be a good idea to download a copy of the current configuration file, as a reference. If prior configuration changes have been made or if the login passwords have been changed, these changes will have to be made again after the update. Note: Once the camera has been updated to a new version, the factory default configuration file and passwords will be restored to the camera. This process will perform one or more reboots during the updates. The update process typically takes approximately 10-20 minutes per camera and will bring the FLIR camera to the latest firmware revision, depending on how many updates need to be applied. Important: Please follow the update steps in the order they are provided in this guide. Registered users can login to download manuals, utility software, firmware updates and instructions. The FFUT software is available through the web site. The user selects the type of products that will be updated, and the tool is able to check the FLIR website for the latest version and download the update to the PC, so it can be used to update the cameras. ![]() The tool can automatically scan the network for cameras to be updated. If more than one firmware update is required for a camera, the tool will sequentially apply the required updates. The FLIR Firmware Update Tool can be used to automatically update cameras to the latest firmware version. The utility is not used in general with the FLIR Thermography cameras, with the exception of the A310pt camera. ![]() The FFUT utility is used with FLIR Security and Maritime IP cameras that use Nexus technology. Introduction For existing camera installations, a software utility called the FLIR Firmware Update Tool (FFUT) is available to automatically perform a firmware update. 70 Castilian Drive Goleta, CA 93117 Phone: +1. (+1.888.747.3547)Ĭomment Initial Release with FFUT v1.8.0.0 New features with v1.8.4.0įLIR Support web site: Security Resources web site: Support questions can also be sent directly to ġ. Please contact your local FLIR dealer or distributor if you have any questions.įLIR Systems, Inc. There are special versions of the systems that are approved for international distribution and travel. The FLIR thermal imaging systems are controlled by US export laws. This product is protected by patents, design patents, patents pending, or design patents pending. All other trademarks, trade names, or company names referenced herein are used for identification only and are the property of their respective owners. Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR Commercial Systems, Inc. No parts of this manual, in whole or in part, may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable form without the prior written permission of FLIR Commercial Systems, Inc. ![]() Quick Start Guide FLIR Firmware Update Tool
0 Comments
Leave a Reply. |